plate backchamber

plate backchamber

Aluminum alloy auto parts

Change point

1, try to use sealant, if necessary, paint can be used to achieve the ideal sealing effect.

Second, the appearance quality of rubber seals should be carefully checked before assembly; Press with special tools to avoid beating deformation.

Third, fill lubricating grease according to the regulations, regularly clean and dredge the vent hole and check valve.

Fourth, the assembly is carried out under extremely clean conditions, and the working surface of the parts is free from bumps, scratches, burrs and other attachments.

Fifth, strict operating procedures, seals should be correctly installed to prevent deformation.

Sixth, master the performance specifications and use requirements of seals, and replace failure parts in time.

Seventh, for thin-wall parts of the side cover, sheet metal cooling is used to correct; The shaft hole parts that are easy to wear can be metal-sprayed, weld-repaired, glued and machinized to reach the original size.

Eighth, the nut slide broken, loose should be repaired or replaced with a new part, and screw to the specified torque.